Kawai MP7 Manual do Utilizador

IntroductionRecorderAppendixSYSTEM MenuUSB MenuSTORE Button & SETUPs EDIT MenuMain OperationOwner’s Manual v1.02

10Introduction1Feature Highlights‘Responsive Hammer 2’ weighted-key action, with Ivory Touch key surfaces and Let-o simulationThe MP7’s Responsive Ha

100USB MenuUSB Menu Functions2 SaveThese functions allow data stored in the instrument’s internal memory to be saved to a USB memory device.1. Save On

101USB Menu4. Save All SoundThis function saves the parameters for all internal sounds to a USB memory device.After selecting this function, enter a n

102USB Menu4 RenameThese functions allow data stored on a USB memory device to be renamed.1. Selecting the type of le to renamePress the CURSOR butto

103USB Menu5 FormatThis function allows a USB memory device to be formatted, erasing all stored data.The Format function will erase all data stored on

104SYSTEM MenuThe SYSTEM menu contains parameters and settings that aect the general operation of the MP7. These settings are grouped into six categ

105SYSTEM Menu1 Utility1. System TuningThis parameter sets the global master tuning of the MP7 in 0.5Hz increments.* The default setting is A = 440.0

106SYSTEM MenuSYSTEM Menu Parameters & Functions2 Pedal1. Right Pedal ModeThis parameter determines the global operation for the right pedal of th

107SYSTEM MenuExpression pedal calibrationDepending on the brand and model of expression pedal connected to the MP7, it may be necessary to use the ca

108SYSTEM MenuSYSTEM Menu Parameters & Functions3 MIDI1. System ChannelThis parameter determines the System MIDI channel used to receive MIDI mess

109SYSTEM Menu4 Oset1. EQ Oset ON/OFFThis parameter turns the EQ Oset function ON or OFF.The EQ Oset function may be useful when performing at a v

11Introduction256Setupmemories:enoughforthe busiest stage musicianThe MP7 allows every single customised sound, knob position, fader level, and adjust

110SYSTEM MenuCreating a User Touch Curve1. Starting the User Touch Curve analysisAfter selecting the User Touch Curve memory to be edited:Press the F

111SYSTEM MenuCreating a User Temperament1. Selecting the User Temperament editorAfter selecting the User Temperament to be edited:Press the F4 functi

112SYSTEM MenuCreating a User Key Volume1. Selecting the User Key Volume editorAfter selecting the User Key Volume to be edited:Press the F4 function

113SYSTEM MenuCreating a User Stretch Tuning1. Selecting the User Stretch Tuning editorAfter selecting the User Stretch Tuning to be edited:Press the

114SYSTEM Menu6 ResetThe Reset category contains functions to reset sounds, setups, and settings back to the original factory default.Once performed,

115SYSTEM MenuPanelLock( )The Lock ( ) function allows the state of the MP7’s various controls to be temporarily locked, preventing accidental button

116AppendixUSB MIDI (USB to Host connector)The MP7 features a ‘USB to Host’ type connector, allowing the instrument to be connected to a computer usin

117AppendixThis page contains instructions for updating the system software of the MP7, when issued by Kawai.Please read these instructions thoroughly

118AppendixPIANO E.PIANO DRAWBAR ORGAN1A Concert Grand Classic EP T.Wheel A-1 Church OrganB Studio Grand Classic EP 2 T.Wheel A-2 Full PipesC Mellow G

119Appendix16 Swing1 Funk Shue 12 Funk Shue 23 Hip Hop 14 Hip Hop 25 Hip Hop 36 Hip Hop 47 16 Shue 18 16 Shue 29 16 Shue 316 Funk10 Funky Beat 11

12Introduction1Front Panel: Knobs, Faders & ButtonsControl WheelsPITCHBENDwheelThis control wheel smoothly bends the pitch up or down from its cur

120AppendixEFX Categories, Types, & Parameters1. ChorusVariation SUB Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Parameter 6 Param

121Appendix6. Auto PanVariation SUB Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Parameter 6 Parameter 7 Parameter 8 Parameter 9 Parame

122Appendix12. RotaryVariation SUB Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Parameter 6 Parameter 7 Parameter 8 Parameter 9 Paramet

123Appendix17. Wah+Variation Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Parameter 6 Parameter 7 Parameter 8 Parameter 9 Parameter 10C

124Appendix21. Compressor+Variation Parameter 1 Parameter 2 Parameter 3 Parameter 4 Parameter 5 Parameter 6 Parameter 7 Parameter 8 Parameter 9 Parame

125AppendixKawai MP7 Stage PianoKeyboard 88 weighted keys with Ivory Touch key surfacesResponsive Hammer 2 (RH2) action with Let-OSound Source Harmo

126AppendixContents1. Recognised data1.1 Channel Voice Message1.2 Channel Mode Message1.3 System Realtime Message2. Transmitted data2.1 Channel V

127Appendix1 Recognised Data1.1 Channel Voice MessageNote oStatus 2nd Byte 3rd Byte8nH kkH vvH9nH kkH 00Hn=MIDI channel number :0H-fH(ch.1 ~ ch.16)k

128Appendix1.1 Channel Voice Message (cont.)ExpressionStatus 2nd Byte 3rd ByteBnH 0bH vvHn=MIDI channel number :0H-fH(ch.1 - ch.16)vv=Expression

129Appendix1.1 Channel Voice Message (cont.)RPN MSB/LSBStatus 2nd Byte 3rd ByteBnH 63H mmHBnH 62H llHn=MIDI channel number :0H-fH(ch.1 ~ ch.16)mm=

13IntroductionMIXER SectionVOLUME fadersThese faders control the individual volume levels of the MAIN, SUB1, SUB2, and SUB3 zones. When multiple zone

130Appendix1.2 Channel Mode MessageAll Sound OFFStatus 2nd Byte 3rd ByteBnH 78H 00Hn=MIDI channel number :0H-fH(ch.1 ~ ch.16)Reset All ControllerSt

131Appendix2 Transmitted Data2.1 Channel Voice MessageNote oStatus 2nd Byte 3rd Byte8nH kkH vvHn=MIDI channel number :0H-fH(ch.1 ~ ch.16)kk=Note N

132Appendix2.2 Channel Mode MessageReset All ControllerStatus 2nd Byte 3rd ByteBnH 79H 00Hn = MIDI channel number :0H-fH(ch.1 ~ ch.16) *Sending by

section133Appendix3 Exclusive Data3.1 MMC CommandsNo. Description Value Notes1 Exclusive F0H2 Universal Real Time 7FH3 Device ID 0-7FH4 MMC command 06

134Appendix3.4 Setup Address: Internal SectionCategory ParameterAddress MSB/LSB (HEX)Byte Value (HEX)MAIN SUB1 SUB2 SUB3Buttons Part Switch 00/5E 02/0

135Appendix3.4 Setup Address: Internal Section (cont.)Category ParameterAddress MSB/LSB (HEX)Byte Value (HEX)MAIN SUB1 SUB2 SUB33. Sound Volume 01/37

136Appendix3.4 Setup Address: Internal Section (cont.)Category ParameterAddress MSB/LSB (HEX)Byte Value(HEX)MAIN SUB1 SUB2 SUB36. Control Damper Pedal

137Appendix3.5 Setup Address: MIDI SectionSys-EX Parameters Address MSB/LSB (HEX)Byte Value (HEX)Category Parameter MAIN SUB1 SUB2 SUB3Buttons Part Sw

138Appendix3.6 Internal Section’s Assignable Knob DataParameter NameData (HEX) Sound Type1st/2nd Piano E.Piano T.Wheel Others1. REVERB Rev.Type 00/01z

139Appendix4 SOUND/SETUP Program/BankIf the Receive Mode MIDI parameter is set to Panel (page 108), the MP7 receives MIDI data on the System Channel o

14IntroductionPart Names & FunctionsDISPLAY SectionLCD DisplayThe LCD display provides a visual indication of the selected zone and sound, paramet

140Appendix5 Program Change Number ListNameProgram Mode = Panel Program Mode = GMPrg. MSB LSB Prg. MSB LSBPIANOConcert Grand 1 0 0 1 121 0Studio Grand

141AppendixNameProgram Mode = Panel Program Mode = GMPrg. MSB LSB Prg. MSB LSBSTRINGS / VOCALString Pad 1 0 1 49 95 8Warm Strings 2 0 1 49 95 1Warm St

142AppendixNameProgram Mode = GMPrg. MSB LSBMIDIWide Honky Tonk 4 121 1WideHarpsichord 7 121 2Glocken 10 121 0Wide Vibraphone 12 121 1Wide Marimba 13

143Appendix5 Control Change Number (CC#) TableControl Number Control FunctionDecimal Hex0 0 Bank Select (MSB)1 1 Modulation Wheel or lever2 2 Breath C

144AppendixFunction TransmittedRecognisedRemarksPanel SectionBasicChannelDefault 1 - 16 1 - 16 1 - 16Changed 1 - 16 1 - 16 1 - 16ModeDefault 3 3 3Mess

Hello to Jason Isaacs!Joep, snijd je baard!David, thank you for your sharp eyesight!

MP7 Owner’s ManualKPSZ-0687 OW1077E-J1404Printed in IndonesiaCopyright © 2014 Kawai Musical Instruments Mfg. Co.,Ltd. All Rights Reserved.817961-R101

15IntroductionRECORDER SectionON/OFF buttonThis button turns the RECORDER section ON or OFF.METRONOME buttonThis button activates the METRONOME or RHY

16Introduction2 Front Panel: Jacks & ConnectorsHEADPHONE jackThe headphone jack is located at the left end of the key slip and used to connect a p

17IntroductionFOOT CONTROLLER SectionEXP jackThis jack is used to connect an expression pedal.* For information about calibrating the expression pedal

18IntroductionConnectingtoOtherDevicesControl external MIDI devices, or connect to a computer with a MIDI interface.Connect to a computer to exchange

19IntroductionUnderstanding the MP7 Preparation before useThe MP7 does not feature built-in speakers. Therefore, in order to listen to the MP7, it w

20Main OperationGetting StartedAfter connecting the power cable, speakers/headphones, and pedals, it’s time to start playing the MP7 stage piano. Thi

21Main OperationThe MP7 stage piano features a wide selection of realistic instrument sounds suitable for various musical styles Sounds are arranged i

22Main Operation1 Zone BasicsAs noted in the Introduction chapter, the MP7 features four zones: MAIN, SUB1, SUB2, and SUB3. This page will explain th

23Main Operation2 Zone Modes (INT/EXT/BOTH)Also noted in the introduction, the MP7’s four zones can each be set to control the instrument’s internal s

24Main Operation3 Zone Key RangeBy default, the four zones will each utilise all 88-key of the MP7’s keyboard. However, by using the Key Range functi

25Main Operation2. Setting the MAIN zone key rangePress and hold the MAIN button, then press the desired low key, followed by the desired high key for

26Main OperationIn regular Play Mode the LCD display provides a visual indication of the selected zone and sound, and the values of the four real-time

27Main OperationEects Section1 ReverbReverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert

28Main Operation2 EFXIn addition to reverb, various other eects can be applied to each zone, altering the tonal character and feeling of the selected

29Main Operation Changing the eect category, type and additional parametersPress and hold the EFX button for the desired zone.The rst EFX page of t

3Thank you for purchasing this Kawai MP7 stage piano.This owner’s manual contains important information regarding the instrument’s usage and operation

30Main Operation3 Amp Simulator (MAIN zone only)The tonal character of an amplier or speaker cabinet is an important component of vintage electric pi

31Main OperationAmp Simulator parametersPage Knob Parameter Description Value range1A Amp Type Changes the type of amplier model. [see table above]B

32Main OperationThe MP7’s tonewheel mode is a special function that transforms the instrument into a vintage electromechanical organ, complete with dr

33Main Operation Adjusting the organ’s drawbar registrationWhile the tonewheel edit screen is shown in the LCD display, and the 16’ drawbar group tab

34Main Operation1 EQThe EQ function consists of a 4-band graphic equaliser that can be used to shape the overall tone of the MP7’s internal sounds. T

35Main Operation AdjustingEQparameters(cont.)While the gain page of the EQ is shown:Press the CURSOR d button. The frequency page of the EQ will be s

36Main Operation2 TransposeThe Transpose function allows the pitch of the MP7’s keyboard to be raised or lowered in semi-tone steps. This is particula

37Main Operation Turning Transpose ON or OFFPress the TRANSPOSE button to turn the transpose function ON or OFF.The LED indicator for the TRANSPOSE b

38EDIT MenuOverviewoftheEDITMenu(INT mode)The EDIT menu contains various parameters that can be used to adjust the MP7's MAIN and SUB zones in IN

39EDIT Menu Selecting the parameter categoryAfter entering the EDIT Menu:Press the CURSOR buttons to select the desired category, then press the +/YE

4Important Safety Instructionsdenotes that care should be taken.The example instructs the user to take care not to allow ngers to be trapped.denotes

40EDIT MenuEDIT Menu parameters (INT mode)1 Reverb1. TypeThis parameter selects the reverb type.* For more information about reverb, please refer to p

41EDIT Menu2.2 Amp Simulator (MAIN zone)1. Amp TypeThis parameter selects the simulated amplier type.* For more information about the various Amp Sim

42EDIT MenuEDIT Menu parameters (INT mode)3 Sound1. VolumeThis parameter adjusts the volume level of the selected sound independently of the zone’s vo

43EDIT Menu16. Vibrate DepthThis parameter adjusts the depth of the vibration applied to the selected sound.17. Vibrate RateThis parameter adjusts the

44EDIT Menu3 Sound (MAIN zone, TONEWHEEL mode)1. External ControlThis parameter determines whether or not the toneweel organ drawbars can be adjusted

45EDIT MenuTemperament typesTemperament type DescriptionEqual Temperament(Equal)This is the most popular tuning method that divides the scale into tw

46EDIT Menu5 Key Setup (cont.)Touch Curve typesTouch Curve No. DescriptionLight +Requires less striking force to achieve a forte note.* This touch cu

47EDIT Menu5 Key Setup (cont.)7/8. Velocity SwitchThese parameters enable velocity switching, and set the velocity switch type and value.Velocity Swit

48EDIT MenuEDIT Menu parameters (INT mode)6 Controllers1. Damper PedalThis parameter determines whether or not the included F-10H damper pedal is acti

49EDIT Menu6 Controllers (cont.)14.RightPedalThis parameter determines whether or not the right pedal of the optional F-30 pedal unit is active for th

5WARNINGIndicates a potential hazard that could result in death or serious injury if the product is handled incorrectly.Do not insert or disconnect th

50EDIT Menu7 Knob AssignThe Knob Assign screen is used to assign EDIT menu parameters to the four main control knobs A, B, C, and D for direct, real-t

51EDIT MenuAssignable control knob parametersParameter NameSound TypePiano E.Piano T.Wheel Others1. REVERB Rev.Typez RevPreDlyz Rev.TimezRev.Depthzzz

52EDIT MenuEDIT Menu parameters (INT mode)8 Virtual Technician (PIANO sounds)1. VoicingThis parameter attempts to recreate the technique of adjusting

53EDIT MenuVirtual Technician (E.PIANO, HARPSICHORD, BASS sounds)1. Key-o NoiseWhen an E.PIANO category sound is selected, this parameter adjusts the

54EDIT MenuThe EDIT menu can also be used to adjust parameters for zones in EXT mode. As with the INT mode EDIT menus, the parameters are grouped by

55EDIT Menu Selecting the parameter categoryAfter entering the EDIT Menu:Press the CURSOR buttons to select the desired category, then press the +/YE

56EDIT Menu1 Channel/Program1. MIDI Transmitting ChannelThis parameter determines which MIDI channel will be used to transmit event information for th

57EDIT Menu3 Transmit The Transmit category parameters are all SYSTEM parameters. These parameters are memorised automatically and therefore do not n

58EDIT Menu5 Key Setup1. Touch ModeThis parameter selects the trigger point for the keyboard.A fast/higher trigger point may be useful when playing so

59EDIT Menu5 Key Setup (cont.)11. DynamicsThis parameter adjusts the keyboard response (velocity compression) of the selected zone independently of th

6Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury.Do not stand on the product or exertexcessive forc

60EDIT Menu6 Controllers1. Damper PedalThis parameter determines whether or not the included F-10H damper pedal is active for the selected zone.* For

61EDIT Menu6 Controllers (cont.)13.LeftPedalThis parameter determines whether or not the left pedal of the optional F-30 pedal unit is active for the

62EDIT MenuOverviewoftheEDITMenu(BOTH mode)When a zone is set to BOTH mode, the EDIT menu will display a combination of INT mode and EXT mode paramete

63STORE Button & SETUPsAfter using the EDIT menu and control knobs to adjust the parameters for the selected sound/zone, the STORE button is used

64STORE Button & SETUPsOverview of the STORE Button2 Storing a SETUPThis function will store all the EDIT menu parameters for the MAIN and SUB zon

65STORE Button & SETUPs3 Storing POWERON settingsThis function will store all the EDIT menu parameters for the MAIN, SUB1, SUB2, and SUB3 zones, p

66STORE Button & SETUPsThe MP7’s SETUP memories allow the entire instrument conguration, including selected sounds, section volume levels, parame

67RecorderThe MP7’s Recorder features convenient functions to record and playback performances from the instrument’s internal memory or a connected US

68RecorderSong Recorder (Internal memory)The Song Recorder function allows up to 10 dierent songs to be recorded, stored in internal memory, and play

69Recorder4. Starting the song recorder (recording)Press a key on the keyboard.The LED indicators for the z and f/ buttons will turn ON, the bar/beat

7• The power supply cord or the plug has been damaged.• Objects have fallen, or liqu

70RecorderSong Recorder (Internal memory)2 Playing back a songThis function is used to playback recorder songs stored in internal memory. To playback

71Recorder Moving the playback position (seek)Press the __ or `` recorder control buttons to move the playing position of the song backward and for

72Recorder3 Saving a song as an SMF leThis function is used to save recorder songs to a USB memory device in SMF (Standard MIDI File) format.1. Selec

73Recorder5. Saving the songPress the F4 function button (EXEC).The Save SMF conrmation screen will be shown in the LCD display.Press the F2 button (

74Recorder4 Loading an SMF le into memory (cont.)3. Selecting the Load SMF functionPress the F3 function button (LOAD).A listing of the SMF les stor

75Recorder5. Selecting the keyboard and drum channelsTurn control knobs C and D to specify which channels of the SMF le should be loaded into the MP7

76Recorder5 Erasing a songThis function is used to erase songs that have been recorded incorrectly, or are simply no longer required.1. Selecting the

77Recorder6 Song TransposeThis parameter allows the playback pitch of songs stored in memory to be raised or lowered in semi-tone steps. This may be

78Recorder9 SMF Direct PlayThis function allows 16-track SMF les to be played directly from USB memory.1. Selecting the Load SMF functionAfter prepar

79RecorderSMF MixerThe SMF Mixer screen allows the volume levels of all 16 tracks of the loaded SMF le to be adjusted or muted.1. Selecting the SMF M

8Important Safety Instructions ...4Table of Contents ...8IntroductionWelcome to the MP7 ...

80Recorder1 Recording an audio leThe MP7 is also capable of recording performances (including LINE IN input audio) as digital audio – saving the data

81Recorder Selecting the audio recorder input, adjusting gain levelTurn control knob C to select the desired audio recorder input.Turn control knob D

82RecorderAudio Record/Playback (USB memory)5. Stopping the audio recorder, auditioning the recordingPress the f/ recorder control button.The LED ind

83Recorder2 Playing an audio leThe MP7 is also capable of playing MP3 and WAV audio les stored on a USB memory device. This function allows perform

84RecorderAudio Record/Playback (USB memory)2 Playing an audio le (cont.) USB device le/folder listing screenThe MP7’s le/folder listing screen li

85Recorder Moving the playback position (seek)Press the __ or `` recorder control buttons to rewind or fast-forward the playing position of the aud

86Recorder3 Overdubbing an audio leThe overdub function adds supplementary recording(s) to an existing audio le, facilitating simple multi-track rec

87Recorder5. Selecting the overdub function and le formatPress the F2 function button (OVERDUB).The overdub le format selection screen will be shown

88Recorder7. Starting the overdub (record)Press a key on the keyboard.The LED indicators for the z and f/ buttons will turn ON, the time counter show

89Recorder10.SavingthedubbedlePress the F4 function button (EXEC).The save audio conrmation screen will be shown in the LCD display.Press the F2 but

9RecorderOverview of the Recorder ...67Song Recorder (Internal memory) ...681. Recording a song ...

90Recorder4 Converting a recorder song to an audio le (cont.)3. Selecting the MIDI to Audio le formatTurn control knob B to select the desired MIDI

91Recorder5. Starting the conversion (record)Press the f/ recorder control button.The LED indicators for the z and f/ buttons will turn ON, the time

92RecorderMetronomeThe Metronome function provides a steady beat to aid practicing the piano at a consistent tempo. In addition to regular metronome

93Recorder Returning to the previous screen (BACK function)While the metronome is counting:Press the F4 function button (BACK) to return to the previ

94Recorder2 Rhythm mode (cont.) Starting and Stopping the drum rhythmPress the F3 function button (LISTEN)The LISTEN icon will become highlighted and

95Recorder Drum rhythm categories and variations16 Swing1 Funk Shue 12 Funk Shue 23 Hip Hop 14 Hip Hop 25 Hip Hop 36 Hip Hop 47 16 Shue 18 16 Shu

96RecorderMetronome3 Recording with the metronomeRecording with the metronome is a convenient way to maintain consistent timing and rhythm while playi

97Recorder4. Returning to the Recorder functionPress the F4 function button (BACK) to return to the recorder function.The LED indicator for the METRON

98USB MenuOverviewoftheUSBMenuThe USB Menu contains functions to load, save, delete, and rename the various types of MP7 data stored on a USB memory d

99USB MenuUSBMenuFunctions1 LoadThese functions allow data stored on a USB memory device to be loaded into the instrument’s internal memory.Loadfuncti